Horn

Next I fitted the horn and tried it!! ( then wish I had'nt )

Horn button boss plate

This is a plate I made to fit in the boss to stop the wiring getting trapped as you turn the wheel.

The black bit is a small hole to put a wire through then fit the plate to the column, the wire is then wound loosely in the gap between the plate and the boss.

As the steering is turned the coil is tightend or slackend.

Air Filter

With the Jenveys fitted the backplate and filter was fitted.

Pipes

With the rad fitted I then did the pipework (what a nightmare!)

I don't think I did a bad job though....

Need to keep it cool

The radiator was placed inside the nose and measured on fit.

The nose was then taken off and the rad was fitted.

Nose ( I thought I was building a car... Not a frog )

Next was to trim and fit the nose cone.

Take your time with this as it will show if you don't...

Rear Lights

With the rear wing on it's time to fit the lights.






Keep the underside neat and tidy and it looks good.